View D6A-SKG-M3Q2-1_8962063.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

28/12/2017 v4.0 1 features: > high brightness surface mount led using thin film technology. > 115 viewing angle. > low thermal resistance. > qualified according to jedec moisture sensitivity level 2. > compatible to ir reflow soldering. > environmental friendly; rohs compliance. > compliance to automotive standard; aec-q101. > superior corrosion resistance. appx. 4.1 extreme power domiled with its significant power in terms brightness, viewing angle and variety of application possibilities, extreme power domiled truly is a standout performer! ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. data sheet: extreme power domiled alingap : d6x-skg ? 2005 domiled is a trademark of dominant opto technologies. all rights reserved. product specifcations are subject to change without notice. dominant opto technologies innovating illumination tm applications: > automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > automotive: exterior applications, eg: signal lighting, center high mounted stop light (chmsl), rear combination light (rcl).
2 part ordering number color viewing angle? luminous flux @ if = 140ma(lm) appx. 1.2 min. typ. max. optical characteristics at tj=25?c typ. (v) vf @ if = 140ma appx. 3.1 electrical characteristics at tj=25?c max. (v) v r @ i r = 10ua min. (v) part number d6x-skg 2.30 12 2.50 unit absolute maximum ratings maximum value dc forward current peak pulse current; (tp 10s, duty cycle = 0.1) reverse voltage esd threshold (hbm) led junction temperature operating temperature storage temperature thermal resistance - real thermal resistance junction / ambient, r th ja real junction / solder point, r th js real - electrical thermal resistance junction / ambient, r th ja el junction / solder point, r th js el (mounting on fr4 pcb, pad size >= 16 mm 2 per pad) 200 300 12 2 125 -40 +115 -40 +125 110 60 100 40 ma ma v kv ?c ?c ?c k/w k/w k/w k/w min. (v) 1.90 28/12/2017 v4.0 alingap : d6x-skg dominant opto technologies innovating illumination tm d6s-skg-k3n2-1 D6A-SKG-M3Q2-1 d6y-skg-l3p2-1 super red, 632nm amber, 617nm yellow, 589nm 115 115 115 9.35 15.8 12.2 13.9 23.5 18.1 20.6 34.8 26.8
3 optical characteristics at tj=25?c 28/12/2017 v4.0 d6s, super red d6a; amber d6y; yellow group wavelength grouping at tj= 25?c wavelength distribution (nm) appx. 2.2 color full full w x y full x y z 627 - 639 612 - 624 612 - 616 616 - 620 620 - 624 586 - 595 586 - 589 589 - 592 592 - 595 alingap : d6x-skg dominant opto technologies innovating illumination tm brightness group luminous flux appx. 1.2 (lm) luminous flux group k3 l2 l3 m2 m3 n2 n3 p2 p3 q2 9.35 ... 10.7 10.7 ... 12.2 12.2 ... 13.9 13.9 ... 15.8 15.8 ... 18.1 18.1 ... 20.6 20.6 ... 23.5 23.5 ... 26.8 26.8 ... 30.6 30.6 ... 34.8
4 28/12/2017 v4.0 vf bining (optional) forward voltage (v) appx. 3.1 vf @ if = 140ma v1 v2 v3 v4 1.90 ... 2.05 2.05 ... 2.20 2.20 ... 2.35 2.35 ... 2.50 please consult sales and marketing for special part number to incorporate vf binning. alingap : d6x-skg dominant opto technologies innovating illumination tm
5 28/12/2017 v4.0 alingap : d6x-skg dominant opto technologies innovating illumination tm forward voltage v f (v) forward current i f (ma) relative luminous flux rel forward current i f (ma) wavelength (nm) allowable forward current i f ( ma ) duty ratio, % allowable forward current vs duty ratio ( t j = 25c; t p 10s ) radiation pattern forward current vs forward voltage i f = f(v f ); t j = 25c temperature t(c) maximum current vs temperature i f =f(t) relative spectral emission rel = f(); t j = 25c; i f = 140ma ? from: joey lim [mailto:hwei-ying.lim@dominant-semi.com] sent: monday, july 13, 2015 4:37 pm to: 'ng wl' cc: 'lim cs' subject: radiation pattern ? hi wei leng, pls update the radiation pattern for d6x-skg with the attached. thanks. best regards, joey lim ext 2090 ? ? forward current i f (ma) relative luminous flux vs forward current v / v (140ma) = f(i f ); t j = 25c 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 20 40 60 80 100 120 140 160 180 200 0 20 40 60 80 100 120 140 160 180 200 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 relative luminous flux rel forward current i f (ma) forward current i f (ma) relative lumionous flux vs forward current v / v (140ma) = f(i f ); t j = 25c forward current vs forward voltage i f = f(v f ); t j = 25c forward voltage v f (v) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 350 400 450 500 550 600 650 700 750 800 850 yellow amber super red relative luminous flux rel relative spectral emission rel = f( ); t j = 25c; i f = 140ma wavelength (nm) forward current i f (ma) maximum current vs temperature i f = f (t) temperature t(c) t a t s 0 20 40 60 80 100 120 140 160 180 200 220 0 20 40 60 80 100 120 t a = ambient temperature t s = solder point temperature allowable forward current i f ( m a ) allowable forward current vs duty ratio ( t j = 25c; t p 10 s ) duty ratio, % 10 100 1000 0.1 1 10 100 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 20 40 60 80 100 120 140 160 180 200 0 20 40 60 80 100 120 140 160 180 200 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 relative luminous flux rel forward current i f (ma) forward current i f (ma) relative lumionous flux vs forward current v / v (140ma) = f(i f ); t j = 25c forward current vs forward voltage i f = f(v f ); t j = 25c forward voltage v f (v) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 350 400 450 500 550 600 650 700 750 800 850 yellow amber super red relative luminous flux rel relative spectral emission rel = f( ); t j = 25c; i f = 140ma wavelength (nm) forward current i f (ma) maximum current vs temperature i f = f (t) temperature t(c) t a t s 0 20 40 60 80 100 120 140 160 180 200 220 0 20 40 60 80 100 120 t a = ambient temperature t s = solder point temperature allowable forward current i f ( m a ) allowable forward current vs duty ratio ( t j = 25c; t p 10 s ) duty ratio, % 10 100 1000 0.1 1 10 100 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 20 40 60 80 100 120 140 160 180 200 0 20 40 60 80 100 120 140 160 180 200 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 relative luminous flux rel forward current i f (ma) forward current i f (ma) relative lumionous flux vs forward current v / v (140ma) = f(i f ); t j = 25c forward current vs forward voltage i f = f(v f ); t j = 25c forward voltage v f (v) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 350 400 450 500 550 600 650 700 750 800 850 yellow amber super red relative luminous flux rel relative spectral emission rel = f( ); t j = 25c; i f = 140ma wavelength (nm) forward current i f (ma) maximum current vs temperature i f = f (t) temperature t(c) t a t s 0 20 40 60 80 100 120 140 160 180 200 220 0 20 40 60 80 100 120 t a = ambient temperature t s = solder point temperature allowable forward current i f ( m a ) allowable forward current vs duty ratio ( t j = 25c; t p 10 s ) duty ratio, % 10 100 1000 0.1 1 10 100 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 20 40 60 80 100 120 140 160 180 200 0 20 40 60 80 100 120 140 160 180 200 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 relative luminous flux rel forward current i f (ma) forward current i f (ma) relative lumionous flux vs forward current v / v (140ma) = f(i f ); t j = 25c forward current vs forward voltage i f = f(v f ); t j = 25c forward voltage v f (v) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 350 400 450 500 550 600 650 700 750 800 850 yellow amber super red relative luminous flux rel relative spectral emission rel = f( ); t j = 25c; i f = 140ma wavelength (nm) forward current i f (ma) maximum current vs temperature i f = f (t) temperature t(c) t a t s 0 20 40 60 80 100 120 140 160 180 200 220 0 20 40 60 80 100 120 t a = ambient temperature t s = solder point temperature allowable forward current i f ( m a ) allowable forward current vs duty ratio ( t j = 25c; t p 10 s ) duty ratio, % 10 100 1000 0.1 1 10 100 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 20 40 60 80 100 120 140 160 180 200 0 20 40 60 80 100 120 140 160 180 200 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 relative luminous flux rel forward current i f (ma) forward current i f (ma) relative lumionous flux vs forward current v / v (140ma) = f(i f ); t j = 25c forward current vs forward voltage i f = f(v f ); t j = 25c forward voltage v f (v) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 350 400 450 500 550 600 650 700 750 800 850 yellow amber super red relative luminous flux rel relative spectral emission rel = f( ); t j = 25c; i f = 140ma wavelength (nm) forward current i f (ma) maximum current vs temperature i f = f (t) temperature t(c) t a t s 0 20 40 60 80 100 120 140 160 180 200 220 0 20 40 60 80 100 120 t a = ambient temperature t s = solder point temperature allowable forward current i f ( m a ) allowable forward current vs duty ratio ( t j = 25c; t p 10 s ) duty ratio, % 10 100 1000 0.1 1 10 100 relative luminous flux rel
6 28/12/2017 v4.0 alingap : d6x-skg dominant opto technologies innovating illumination tm junction temperature t j (c) relative forward voltage ?v f (v) relative forward voltage vs junction temperature ?v f = v f - v f ( 25c) = f(t j ); i f =140ma junction temperature t j (c) relative luminious flux rel junction temperature t j (c) relative wavelength ?dom(nm) relative wavelength vs junction temperature ?dom = dom - dom ( 25c) = f(t j ); i f = 140ma relative luminious flux vs junction temperature v/v( 25c) = f(t j ); i f = 140ma - 0.5 - 0.4 - 0.3 - 0.2 - 0.1 0.0 0.1 0.2 0.3 0.4 0.5 - 50 - 30 - 10 10 30 50 70 90 110 130 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 - 50 - 30 - 10 10 30 50 70 90 110 130 amber super red relative forward voltage ?v f (v) relative forward voltage vs junction temperature ?v f = v f - v f (25 c) = f(t j ); i f = 140ma junction temperature t j ( c) relative luminious flux rel relative luminious flux vs junction temperature v/ v(25 c) = f(t j ); i f = 140ma junction temperature t j ( c) yellow - 0.5 - 0.4 - 0.3 - 0.2 - 0.1 0.0 0.1 0.2 0.3 0.4 0.5 - 50 - 30 - 10 10 30 50 70 90 110 130 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 - 50 - 30 - 10 10 30 50 70 90 110 130 amber super red relative forward voltage ?v f (v) relative forward voltage vs junction temperature ?v f = v f - v f (25 c) = f(t j ); i f = 140ma junction temperature t j ( c) relative luminious flux rel relative luminious flux vs junction temperature v/ v(25 c) = f(t j ); i f = 140ma junction temperature t j ( c) yellow - 10.0 - 8.0 - 6.0 - 4.0 - 2.0 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 - 50 - 30 - 10 10 30 50 70 90 110 130 amber super red relative wavelength ? dom (nm) relative wavelength vs junction temperature ? dom = dom - dom (25 c) = f(t j ); i f = 140ma junction temperature t j ( c) yellow
7 extreme power domiled ? allngap : d6x-skg package outlines material material lead-frame package encapsulant soldering leads cu alloy with au plating high temperature resistant plastic, ppa silicone au plating 28/12/2017 v4.0 alingap : d6x-skg dominant opto technologies innovating illumination tm dominant opto technologies 29/ 12/ 14 extreme powerdomi alingap d6a - skg - pv2.docx page 1 of 9 preliminary under development engineering reference data are not verif ied. the specifications are subject to change without notice. ? super high brightness surface mount led. ? 120? viewing angle. ? low thermal resistance . ? superior corrosion resistant. ? compatible to ir reflow soldering. extreme powerdomi alingap : d6a - s k g note : primary thermal path is through anode lead of led package
8 recommended solder pad 28/12/2017 v4.0 alingap : d6x-skg dominant opto technologies innovating illumination tm dominant opto technologies 29/ 12/ 14 extreme powerdomi alingap d6a - skg - pv2.docx page 5 of 9 preliminary under development engineering reference data are not verif ied. the specifications are subject to change without notice. solder pad design.
9 taping and orientation ? reels come in quantity of 1000 units. ? reel diameter is 180 mm. 28/12/2017 v4.0 alingap : d6x-skg dominant opto technologies innovating illumination tm dominant opto technologies 29/ 12/ 14 extreme powerdomi alingap d6a - skg - pv2.docx page 7 of 9 preliminary under development engineering reference data are not verif ied. the specifications are subject to change without notice. taping and orientation. reels come in quantity of 1 000 units. reel diameters are 18 0 mm.
10 packaging specifcation 28/12/2017 v4.0 alingap : d6x-skg dominant opto technologies innovating illumination tm 08/12/2016 v7.0 13 packaging specifcation ingan warm white: ddf-ljg dominant opto technologies innovating illumination tm
11 28/12/2017 v4.0 alingap : d6x-skg dominant opto technologies innovating illumination tm packaging specifcation average 1pc extreme power domiled 1 completed bag (1000pcs) 0.034 190 10 weight (gram) cardboard box dimensions (mm) empty box weight (kg) super small small medium large for extreme power domiled reel / box cardboard box size weight (gram) 0.036 240 10 dominant tm moisture sensitivity level moisture absorbent material + moisture indicator the reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag reel barcode label label (l) lot no : lotno (p) part no : partno (c) cust no : partno (g) grouping : group (q) quantity : quantity (d) d/c : date code (s) s/n : serial no dominant opto technologies ml temp 2 260?c rohs compliant made in malaysia 325 x 225 x 190 325 x 225 x 280 570 x 440 x 230 570 x 440 x 460 0.38 0.54 1.46 1.92 7 reels max 11 reels max 48 reels max 96 reels max
12 time (sec) 0 50 100 150 200 300 250 225 200 175 150 125 100 75 50 25 275 temperature (?c) classifcation refow profle (jedec j-std-020c) ramp-up 3?c/sec max. 255-260?c 10-30s 60-150s ramp- down 6?c/sec max. preheat 60-180s 480s max 217?c recommended pb-free soldering profle 28/12/2017 v4.0 alingap : d6x-skg dominant opto technologies innovating illumination tm
13 28/12/2017 v4.0 alingap : d6x-skg dominant opto technologies innovating illumination tm appendix 1) brightness: 1.1 luminous intensity is measured with an internal reproducibility of 8 % and an expanded uncertainty of 11 % (according to gum with a coverage factor of k=3). 1.2 luminous fux is measured with an internal reproducibility of 8 % and an expanded uncertainty of 11 % (according to gum with a coverage factor of k=3). 1.3 radiant intensity is measured with an internal reproducibility of 8 % and an expanded uncertainty of 11 % (according to gum with a coverage factor of k=3). 1.4 radiant fux is measured with an internal reproducibility of 8 % and an expanded uncertainty of 1 1 % (according to gum with a coverage factor of k=3). 2) color: 2.1 chromaticity coordinate groups are measured with an internal reproducibility of 0.005 and an expanded uncertainty of 0.01 (accordingly to gum with a coverage factor of k=3). 2.2 dominant wavelength is measured with an internal reproducibility of 0.5nm and an expanded uncertainty of 1nm (accordingly to gum with a coverage factor of k=3). 3) voltage: 3.1 forward voltage, vf is measured with an internal reproducibility of 0.05v and an expanded uncertainty of 0.1v (accordingly to gum with a coverage factor of k=3). 4) corrosion robustness: 4.1 test conditions: 40 c / 90 % rh / 15 ppm h 2 s / 336 h. = stricter than iec 60068-2-43 (h 2 s) [25 c / 75% rh / 10 ppm h 2 s / 21 days].
revision history note all the information contained in this document is considered to be reliable at the time of publishing. however, dominant opto technologies does not assume any liability arising out of the application or use of any product described herein. dominant opto technologies reserves the right to make changes to any products in order to improve reliability, function or design. dominant opto technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the managing director of dominant opto technologies . page - 3 5 5 subjects initial release update wavelength grouping for super red update graph: - relative luminious flux vs forward current - forward current vs forward voltage update temperature coeffcient graph date of modifcation 03 nov 2016 14 aug 2017 27 sep 2017 28 dec 2017 14 28/12/2017 v4.0 alingap : d6x-skg dominant opto technologies innovating illumination tm
about us dominant opto technologies is a dynamic company that is amongst the worlds leading automotive led manu - facturers. with an extensive industry experience and relentless pursuit of innovation, dominants state-of-art manufacturing and development capabilities have become a trusted and reliable brand across the globe. more in - formation about dominant opto technologies, a iso/ts 16949 and iso 14001 certifed company, can be found under http://www.dominant-semi.com. please contact us for more information: dominant opto technologies sdn. bhd lot 6, batu berendam, ftz phase iii, 75350 melaka, malaysia. tel: +606 283 3566 fax: +606 283 0566 e-mail: sales@dominant-semi.com alingap : d6x-skg dominant opto technologies innovating illumination tm

▲Up To Search▲

Price & Availability of D6A-SKG-M3Q2-1

	To Download D6A-SKG-M3Q2-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .